Python变量类型 之 字符串

"""
4.1 字符串的定义

    1.字符串 就是 一串字符,是编程语言中表示文本的数据类型
    2.在 Python 中可以使用 一对双引号 " 或者 一对单引号 ' 定义一个字符串
        虽然可以使用 \" 或者 \' 做字符串的转义,但是在实际开发中:
            如果字符串内部需要使用 ",可以使用 ' 定义字符串
            如果字符串内部需要使用 ',可以使用 " 定义字符串
    3.可以使用 索引 获取一个字符串中 指定位置的字符,索引计数从 0 开始
    4.也可以使用 for 循环遍历 字符串中每一个字符

4.2 字符串的常用操作
    hello_str.capitalize    hello_str.isidentifier  hello_str.rindex
    hello_str.casefold      hello_str.islower       hello_str.rjust
    hello_str.center        hello_str.isnumeric     hello_str.rpartition
    hello_str.count         hello_str.isprintable   hello_str.rsplit
    hello_str.encode        hello_str.isspace       hello_str.rstrip
    hello_str.endswith      hello_str.istitle       hello_str.split
    hello_str.expandtabs    hello_str.isupper       hello_str.splitlines
    hello_str.find          hello_str.join          hello_str.startswith
    hello_str.format        hello_str.ljust         hello_str.strip
    hello_str.format_map    hello_str.lower         hello_str.swapcase
    hello_str.index         hello_str.lstrip        hello_str.title
    hello_str.isalnum       hello_str.maketrans     hello_str.translate
    hello_str.isalpha       hello_str.partition     hello_str.upper
    hello_str.isdecimal     hello_str.replace       hello_str.zfill
    hello_str.isdigit       hello_str.rfind

    操作说明:
    1) 判断类型 - 9
        string.isspace()   如果 string 中只包含空格,则返回 True
        string.isalnum()   如果 string 至少有一个字符并且所有字符都是字母或数字则返回 True
        string.isalpha()   如果 string 至少有一个字符并且所有字符都是字母则返回 True
        string.isdecimal() 如果 string 只包含数字则返回 True,全角数字
        string.isdigit()   如果 string 只包含数字则返回 True,全角数字、⑴、\u00b2
        string.isnumeric() 如果 string 只包含数字则返回 True,全角数字,汉字数字
        string.istitle()   如果 string 是标题化的(每个单词的首字母大写)则返回 True
        string.islower()   如果 string 中包含至少一个区分大小写的字符,并且所有这些(区分大小写的)字符都是小写,则返回 True
        string.isupper()   如果 string 中包含至少一个区分大小写的字符,并且所有这些(区分大小写的)字符都是大写,则返回 True

    2) 查找和替换 - 7
        string.startswith(str) 检查字符串是否是以 str 开头,是则返回 True
        string.endswith(str)   检查字符串是否是以 str 结束,是则返回 True
        string.find(str, start=0, end=len(string))     检测 str 是否包含在 string 中,如果 start 和 end 指定范围,则检查是否包含在指定范围内,如果是返回开始的索引值,否则返回 -1
        string.rfind(str, start=0, end=len(string))        类似于 find(),不过是从右边开始查找
        string.index(str, start=0, end=len(string))        跟 find() 方法类似,不过如果 str 不在 string 会报错
        string.rindex(str, start=0, end=len(string))   类似于 index(),不过是从右边开始
        string.replace(old_str, new_str, num=string.count(old))    把 string 中的 old_str 替换成 new_str,如果 num 指定,则替换不超过 num 次

    3) 大小写转换 - 5
        string.capitalize()    把字符串的第一个字符大写
        string.title()     把字符串的每个单词首字母大写
        string.lower()     转换 string 中所有大写字符为小写
        string.upper()     转换 string 中的小写字母为大写
        string.swapcase()  翻转 string 中的大小写

    4) 文本对齐 - 3
        string.ljust(width)        返回一个原字符串左对齐,并使用空格填充至长度 width 的新字符串
        string.rjust(width)        返回一个原字符串右对齐,并使用空格填充至长度 width 的新字符串
        string.center(width)   返回一个原字符串居中,并使用空格填充至长度 width 的新字符串

    5) 去除空白字符 - 3
        string.lstrip()        截掉 string 左边(开始)的空白字符
        string.rstrip()        截掉 string 右边(末尾)的空白字符
        string.strip()     截掉 string 左右两边的空白字符

    6) 拆分和连接 - 5
        string.partition(str)      把字符串 string 分成一个 3 元素的元组 (str前面, str, str后面)
        string.rpartition(str)     类似于 partition() 方法,不过是从右边开始查找
        string.split(str="", num)  以 str 为分隔符拆分 string,如果 num 有指定值,则仅分隔 num + 1 个子字符串,str 默认包含 '\r', '\t', '\n' 和空格
        string.splitlines()            按照行('\r', '\n', '\r\n')分隔,返回一个包含各行作为元素的列表
        string.join(seq)           以 string 作为分隔符,将 seq 中所有的元素(的字符串表示)合并为一个新的字符串
        
"""

评论